BG Engine Degreaser
BG Engine DegreaserPN 417
Net Wt. 15.7 oz. (445 g)
BG Engine Degreaser is a quick, easy, and clean alternative to remove grease, oil and dirt from all types of combustion engines and similar surfaces. When used as directed, BG Engine Degreaser is safe on paint, rubber, wiring and insulation. Applications include auto and truck engines, lawn mowers, snow blowers and industrial machinery. It will also remove grease and oil from garage floors and driveways. The convenient aerosol container and a plastic spray extension tube enable easy access to those typically hard-to-reach areas.
|Test||ASTM Test Method||Typical Test Results|
|Specific Gravity (H₂O = 1)||D1298||0.8|
|Flash Point, TCC||D56||43.3°C (110°F)|
|Vapor Pressure, psig @ 70°F||44|
|Solubility in Water||Visual||Insoluble|
|Net Weight, oz. (grams)||15.75 (447)|
|Volume, fl. oz.||19.44|
Shake well before using. Be sure surfaces to be sprayed are only warm, not hot. Turn ignition switch to off when used on motorized vehicles and equipment. Cover distributor cap with plastic (on older vehicles, also cover carburetor inlet). For best results use the plastic spray extension tube to direct spray to exact location. Spray liberally on dirty surfaces and allow to stand for five minutes to achieve maximum penetration of degreaser. For extreme build-ups, a second application may be necessary. Use a strong stream of water to rinse off cleaned surfaces after use.
NOTE: If spilled or sprayed on a painted surface or other overspray areas, wipe off or wash immediately.
FOR PROFESSIONAL USE.
BG Products, Inc., accepts no liability for excessive use or misuse of this product.