BG Special HCF Grease
BG Special HCF Grease
PN 60514 oz. (396 g) cartridge |
Environmental or atmospheric chemicals can destroy most industrial lubricants. Without proper lubrication, friction and heat are major causes of wear and fatigue.
BG Special HCF Grease is highly recommended for use in industrial, construction, and manufacturing where fresh water, salt water, salt air, or chemical fumes can cause bearing corrosion and other lubrication problems. It’s especially beneficial in high-speed, high-load, high-heat, roller-bearing, ball-bearing, needle-bearing, and thrust-bearing applications:
• Water washout resistance
• Outstanding mechanical stability
• High temperature stability—drop point of over 500°F (260°C)
• Prevents oxidation due to extreme pressure, heavy loads, and excessive heat
• Corrosion prevention
• Unequaled extreme pressure (EP) and load carrying
SPECIFICATIONS
Test | ASTM Test Method | Typical Test Results |
Worked Penetration, 60 strokes | D217 | 280 |
Dropping Point | D2265 | 288°C (550°F) |
Oxidation Stability, lb. Loss/100 hr. | D942 | 2 |
Four Ball EP, Weld Point, kgf | D2596 | 800 |
Water Washout, % loss | D1264 | <5 |
Four Ball Wear, mm scar | D2266 | <0.50 |
Timken, OK Load, lb. | D2509 | 70 |
Rust Prevention | D1743 | Pass |
USAGE
Use in accordance with equipment manufacturer’s recommendations.
CAUTION: Take special care when applying this product. Grease applications should be properly cleaned of previous grease to maximize performance. BG Special HCF Grease is moderately compatible with lithium-based greases, and performance is maximized with proper removal of previous greases. Previous polyurea-based greases should be extensively removed from the applications prior to BG Special HCF Grease introduction. Please reference the BG Grease Compatibility Chart.
FOR PROFESSIONAL USE.
BG Products, Inc., accepts no liability for excessive use or misuse of this product.