Skip to content

BG Products, Inc.

BG Mass Air Flow Sensor Cleaner

BG Mass Air Flow Sensor Cleaner
PN 4073

3 oz. (99.1 mL) can

BG Mass Air Flow Sensor Cleaner

Cleans hot wires, plastics, rubbers, and all associated materials.

PN 4073

3 oz. (99.1 mL) can

SKU: 4073 Category:

BG Mass Air Flow Sensor Cleaner cleans hot wires, plastics, rubbers, and all associated materials. Cleaning is simple, safe, and fast. Safe for oxygen sensors and catalytic converters.

SPECIFICATIONS
Test  ASTM Test Method Typical Test Results
Specific Gravity (H₂0 = 1) D1298 0.7074
Appearance and Odor Clear/Solvent
Net Weight, oz. (g) 3 (85)
Volume, fl. oz. (mL) 3.35 (99.1)
USAGE

Remove Mass Air Flow Sensor or Idle Air Controller from vehicle. Gently but firmly secure part. Begin spraying a gentle stream of cleaner on all wires, pintles, and other surfaces containing deposits. Be careful not to force any cleaner directly into the component. When the surface is clean, allow it to air-dry before reinstalling on the vehicle. After installation of the component, immediately start the vehicle and allow it to idle 3–5 minutes prior to test-driving. 

Use when the air filter is replaced or every 15,000 miles (24,000 km). 

FOR PROFESSIONAL USE. 
BG Products, Inc., accepts no liability for excessive use or misuse of this product.