PN 103
INSTRUCTIONS
for sludge removal
Wear safety goggles to protect your eyes.
Wear Nitrile®, Neoprene® or PVC gloves to protect your hands.
Wear a long-sleeved shirt to protect your arms.

IMPORTANT! Read product Safety Data Sheet before use.

  1. Bring engine to operating temperature.
  2. Drain engine oil and remove oil filter.
  3. Install new oil filter.
  4. Install BG Dynamic Engine Cleaner, PN 103.
  5. Allow engine to run in Neutral at 3000 RPM for 45 minutes.
    CAUTION: Monitor oil pressure throughout procedure. If engine oil pressure drops, check the oil pump suction line strainer for obstructions.
  6. Immediately drain BG Dynamic Engine Cleaner from engine and remove oil filter.
  7. Install new oil filter.
  8. Install BG Dynamic Engine Cleaner Rinse Oil, PN PE04.
  9. Allow engine to run at 3000 RPM for 20 minutes.
  10. Drain BG Dynamic Engine Cleaner Rinse Oil and remove oil filter.
  11. Install new oil filter.
  12. Install new engine oil.
  13. Install BG MOA®.