BG Universal Cooling System Cleaner
BG Universal Cooling System CleanerPN 540
BG Universal Cooling System Cleaner provides superior removal of scale, oil, and harsh mineral deposits that form in the coolant system. It removes tough residues that are caused by oil fouling, coolant inhibitor breakdown, and glycol oxidation residues. BG Universal Cooling System Cleaner also helps remove rust that can hasten inhibitor depletion and increase breakdown of metal surfaces. The cooling system does not require neutralization after using BG Universal Cooling System Cleaner.
|Test||ASTM Test Method||Typical Test Results|
|Density, U.S. lbs./gal. (kg/m³)||D1250||8.871 (1063)|
|Freezing Point||D1177||–11°C (12°F)|
Add 12 oz. (355 mL) or 8 oz. (237 mL) of BG Universal Cooling System Cleaner to the cooling system. Operate engine until it reaches normal operating temperature. Continue operating the engine for 10 to 30 minutes, keeping the engine at normal operating temperature with heater controls at their highest position. Drain the system and flush with clean water until the system is free of rust. Refill with proper antifreeze and water concentration. BG Universal Cooling System Cleaner can be used in either gasoline or diesel engines. It contains no harsh chemicals and is harmless to all cooling system components. Do not leave the system.
NOTE: For an added dose of superior rust and corrosion protection, add 12 oz. (355 mL) BG Universal Super Cool®, PN 546, to the system. The addition of BG Universal Super Cool® is highly recommended as it helps compensate for any untreated coolant left in the system after the service is performed.
FOR PROFESSIONAL USE.
BG Products, Inc., accepts no liability for excessive use or misuse of this product.