KIT PN KE09 (Gasoline)
KIT PN KE91 (Light-duty diesel)
KIT PN KE92 (Heavy-duty diesel)
KIT PN KE95 (Light-duty diesel)
IMPORTANT! Make sure to take note of the engine crankcase capacity and install the proper amounts of PN 103 and PN PE04. This service can be performed on gasoline and diesel engines. Read and follow the instructions carefully to avoid engine damage.

INSTRUCTIONS
Wear safety goggles to protect your eyes.
Wear Nitrile®, Neoprene® or PVC gloves to protect your hands.
Wear a long-sleeved shirt to protect your arms.

IMPORTANT! Read product Safety Data Sheets before use.

  1. Install BG Platinum® 44K,® PN 208, for gasoline engines; or BG 245® Diesel Fuel System Cleaner, PN 245, or BG Diesel Fuel System Performance Restoration, PN PD15, for diesel engines.
  2. Bring engine to operating temperature.
  3. Drain engine oil and remove oil filter.
  4. Install new oil filter.
  5. Install correct volume of BG Dynamic Engine Cleaner, PN 103, to match the engine crankcase capacity.
  6. Allow engine to run in Neutral at 3,000 RPM for gasoline engines and 1,000 RPM for diesel engines for 45 minutes.
    CAUTION: Monitor oil pressure throughout procedure. If engine oil pressure drops, check the oil pump suction line strainer for obstructions.
  7. Immediately drain BG Dynamic Engine Cleaner from engine and remove oil filter.
  8. Install new oil filter.
  9. Install correct volume of BG Dynamic Engine Cleaner Rinse Oil, PN PE04, to match the engine crankcase capacity.
  10. Allow engine to run in Neutral at 3,000 RPM for gasoline engines and 1,000 RPM for diesel engines for 20 minutes.
  11. Drain BG Dynamic Engine Cleaner Rinse Oil and remove oil filter.
  12. Install new oil filter.
  13. Install new engine oil.
  14. Install BG Advanced Formula MOA,® PN 115, for gasoline engines, or BG DOC® Diesel Oil Conditioner, PN 112, for diesel engines.
R06
©copyright 2022 BG Products, Inc. • Wichita, Kansas 67213. • www.bgprod.com