If you walk into any diesel maintenance facility today the hot topic revolves around diesel soot. Whether it’s in the intake or exhaust, combustion chamber or turbocharger, soot is wreaking havoc on vehicles and industrial equipment.
Fleets are seeing increased maintenance costs and extended equipment downtime. Combine that with technician overtime, road calls and tow bills and you’ll begin to understand the negative impact on business operations. Fleets are looking for answers.
Dealerships are backlogged. Many medium and heavy duty truck dealerships are running 2-5 weeks behind trying to keep their customers’ vehicles in operation. Depending on the business, a typical work truck generates over $100 an hour for a company. There is a revenue loss for each hour the customer’s truck sits in the shop. Dealerships are looking for answers.
Understanding diesel soot and its root causes can help you develop a targeted strategy to overcome these maintenance challenges.
Ash is mainly composed of the metals (or elements) encapsulated within the soot. It is a component of the soot.
It remains in the Diesel Particulate Filter (DPF) after regeneration (regen) occurs.
The question then arises, if the diesel soot is primarily derived from engine oil, how does the oil end up in the exhaust? Your initial response may be the piston rings. While this is true, it is not the only source.
The diesel engine works on a simple principle. Think of it as an air pump.
It sucks in air, squeezes the air/fuel charge until it goes bang. Then blows it out the exhaust. If the engine cannot suck in sufficient air from the air filter, it will pull it from the next available source, the Crankcase Ventilation System (CCV).
Once the engine oil enters the combustion chamber the problems begin. Carbon-packing forms around the piston rings and the piston crown. Soot accumulation occurs in the engine, EGR system, and exhaust after-treatment devices.
I think a better question is “Can we minimize soot?” Yes. By ensuring the pistons rings function normally and using a quality engine oil with a low volatility characteristic. Some engine manufacturers are installing Scraper Rings (or an Anti-polishing Ring (APR)). The scraper ring sits at the top of the cylinder sleeve and scrapes the carbon away from around the piston’s ring land area to reduce blow-by gases and lower sump pressures. This is expensive, and it doesn’t address the oil’s volatility.
Yes, by using a high quality engine oil with low volatility and addressing ring cleanliness. If we reduce the soot formation, we will inevitably reduce ash accumulation in the DPF. Thereby, reducing REGEN frequency and extending the DPF service life.
Whatever soot-related challenges you’re experiencing, whether in the intake or exhaust, DPF, DOC, EGR, carbon-packing around the rings, or turbochargers, there are effective and proven solutions to reduce these failures.